Cardano & Yoroi with Nano X — Wallet Setup

Table of contents

• Overview
• What you need before you start
• Step-by-step: Connect Nano X to Yoroi (How to)
  • Step 1: Prepare the device
  • Step 2: Install the Cardano app
  • Step 3: Create a Yoroi hardware wallet and connect
• Staking ADA on Nano X via Yoroi (how to stake cardano on ledger)
• Security architecture & best practices
• Seed phrase and passphrase management
• Common mistakes & troubleshooting
• Who this setup is for (and who should look elsewhere)
• FAQ
• Conclusion & next steps

Overview

This guide shows how to use a Nano X hardware wallet with Yoroi as a Cardano (ADA) wallet. I'll cover the full setup flow, signing transactions, and how to stake ADA from a hardware-backed account. The focus is practical: step-by-step screens, security trade-offs, and real issues I ran into during testing.

If you searched for cardano ledger nano x or yoroi ledger nano x, this page explains the common steps people follow to add an ada wallet ledger nano x setup into Yoroi and start delegating safely.

What you need before you start

• A Nano X hardware wallet with a current firmware version (see /how-to-update-firmware-steps).
• The Cardano app installed on the device (via your manager/companion app).
• Yoroi installed (desktop extension or mobile app).
• Your 24-word recovery phrase backed up and accessible (see /seed-phrase-management).
• Optional: a passphrase (25th word) if you plan to create hidden wallets (/passphrase-usage).

I recommend checking firmware and app versions first. In my experience, the most common hiccups are outdated firmware or missing the Cardano app on the device.

Step-by-step: Connect Nano X to Yoroi (How to)

Below are the practical steps I use when adding a Nano X to Yoroi. Screens will vary slightly between the desktop extension and mobile app, but the flow is the same.

Step 1: Prepare the device

1. Unlock the Nano X with your PIN.
2. Open the Cardano app on the device (you should see the Cardano logo on the device screen).
3. If the Cardano app isn’t installed, use your manager/companion app to install it first (see /nano-x-setup and /how-to-update-firmware-steps).

(Placeholder image: Device screen showing Cardano app open)

Step 2: Install the Cardano app

• Open your companion/manager application on desktop.
• Find the Cardano app and install it to the Nano X.
• Confirm installation on the device if prompted.

If you hit an error here, try reconnecting the device and re-opening the manager. I noticed a stuck install once and a quick reboot fixed it.

Step 3: Create a Yoroi hardware wallet and connect

1. Open Yoroi (extension or mobile).
2. Choose Add Wallet → Hardware Wallet.
3. Select the hardware vendor option shown (choose the Nano X/ledger option in Yoroi UI) and follow the prompts.
4. Connect via USB or (for mobile) Bluetooth. Approve the connection on the device.
5. Yoroi will display a list of accounts derived from your device — pick one or create a new account.
6. Name the wallet and confirm addresses.

Yoroi will not expose your seed phrase; every transaction must be confirmed on the Nano X. That’s how non-custodial signing stays intact.

Staking ADA on Nano X via Yoroi (how to stake cardano on ledger)

Staking with Yoroi keeps your ADA on-chain and non-custodial. You delegate control of stake (not funds) to a pool.

Step-by-step delegation (short):

1. Open your ADA wallet in Yoroi (the Ledger-backed wallet).
2. Go to the Delegation or Staking tab.
3. Choose a stake pool (use Yoroi’s search/filter or paste a pool ID).
4. Click Delegate and follow on-screen prompts.
5. Confirm the delegation transaction on the Nano X device.

Rewards are distributed on Cardano’s epoch schedule (check /staking for details). Want to change pools? Repeat the delegation flow — each change is an on-chain transaction that you sign on-device.

Security architecture & best practices

Why use a hardware wallet with Yoroi? The Nano X holds private keys inside a secure element and only exposes public addresses to the host. Transactions are signed on-device (an air-gapped-like operation when using USB or Bluetooth). I believe this balance gives strong protection with reasonable convenience.

Security checklist:

• Always verify the device screen before approving transactions.
• Keep firmware updated (/how-to-update-firmware-steps).
• Avoid purchasing from unofficial sellers (see /where-to-buy-safely).
• If you use Bluetooth, be aware of the additional attack surface (see /connectivity-bluetooth-usb). And yes, Bluetooth has real implications for threat models.

For supply chain safety and secure-element details, refer to /secure-architecture and /supply-chain-tamper.

Seed phrase and passphrase management

Most Nano X setups use a 24-word recovery phrase generated during initialization. This follows the BIP-39 standard. You can add an optional passphrase (often called the 25th word) to create a hidden wallet; this is powerful but also dangerous if the passphrase is forgotten.

Options to protect the seed phrase:

• Write the phrase on paper and store it in a safe place.
• Use a metal backup plate for fire/water resistance.
• Consider SLIP-39 (Shamir backup) if you want split-secret backups (see /seed-phrase-management).

But remember: a passphrase is not a backup. If you lose it, recovery can be impossible.

Common mistakes & troubleshooting

• Buying used or unofficial devices — attackers can tamper with firmware or hardware.
• Exposing the seed phrase in photos or cloud backups.
• Forgetting to open the Cardano app on the device when connecting to Yoroi.

If Yoroi doesn’t detect the device, try the troubleshooting steps at /troubleshooting-not-detected and refer to /restore-recovery if you need to recover from a backup.

Small comparison: how this setup stacks up

Feature	Nano X + Yoroi (hardware)	Yoroi (software-only)	Exchange Custody
Non-custodial control	Yes	Yes	No
On-device signing	Yes	No	No
Delegation support	Yes	Yes	Varies
Requires physical device	Yes	No	No

Who this setup is for (and who should look elsewhere)

Who this is good for:

• Long-term ADA holders who want hardware-backed non-custody and easy staking.
• Users who want to interact with Cardano without exposing private keys to a desktop wallet.

Who might look elsewhere:

• People who need multisig security across multiple signers — verify multisig compatibility first (/multisig-setup-compatibility).
• Users who prioritize the absolute simplest one-click mobile access (some mobile hot wallets trade security for convenience).

FAQ

Q: Can I recover my crypto if the device breaks? A: Yes — recover by restoring your 24-word seed phrase (and passphrase, if used) on a compatible hardware wallet or recovery tool. See /recover-if-broken and /restore-recovery.

Q: What happens if the company behind the device goes bankrupt? A: Your crypto sits on the blockchain. As long as you have your seed phrase and keys, you can restore to a compatible wallet. See /company-bankrupt for scenarios and planning.

Q: Is Bluetooth safe for a hardware wallet? A: Bluetooth adds complexity. It can be safe if firmware and companion apps are up to date and you follow recommended OPSEC. See /connectivity-bluetooth-usb for specifics.

Conclusion & next steps

Using Yoroi with a Nano X gives a clear upgrade in signing security while keeping everyday staking and transfers straightforward. In my testing the flow is reliable once firmware and the Cardano app are current. Want to continue? Follow the step-by-step setup above, then read the related guides: /how-to-update-firmware-steps, /seed-phrase-management, and /staking to complete your setup and start delegating ADA.

If you prefer step-focused walkthroughs, check the detailed device setup at /nano-x-setup and the broader Cardano guide at /cardano-guide — they include screenshots and troubleshooting tips.

Ready to set up your Yoroi + Nano X wallet? Start with the firmware and Cardano app, then follow the connect flow in Yoroi. Good luck, and keep your seed phrase offline and secure.